Sale!

Bully time-honored truck covered facet step set

(8 customer reviews)

$57.35$59.66

  • make sure this fits with the aid of getting into your model wide variety.
  • hoop step: our truck side step makes entering and exiting a truck or suv safer and greater convenient. It is a realistic and an cheaper improve on your vehicles and suv.
  • excessive sturdiness: the hoop step is made from unmarried-piece aluminum forged. The step is lightweight but long lasting and does not add pointless weight to the vehicle at the same time as including accessibility on your truck and suv.
  • design: the aspect step uses a matte finish for a generic appearance and offers a non-slip stepping surface. The textured, extra deep step may be connected to a huge variety of trucks and suv.
  • compatibility: the non-slip facet step is well matched with most trucks and suvs via chevrolet, avert ram,ford, gmc, toyota, mazda, and nissan.
  • specifications: the aluminum side step is 12. Three in. Long, 10. 75 in. Extensive and 6 in. Excessive. The packaged contents include all mounting hardware and an training manual for smooth installation.
  • chevrolet:1999-2020 silverado 1500/ 2500/ 3500(all cab sizes),2002- 2013 avalanche, 1988-1999 full length c/k truck 1500/ 2500/ 3500(all cab sizes),1973- 2018 suburban,1992- 2018 tahoe, 1973- 1987 complete size pickups(all cab sizes),1976- 1993 s-10(all cab sizes),1976- 1996 blazer,2000- 2008 trailblazer,1967- 1996 complete length trucks.
  • steer clear of:1994-2018 ram 1500/ 2500/ 3500(all cab sizes),1997-2007 dakota(all cab sizes),1974- 1993 complete length select-united statesall cab sizes),1974- 1992 ramcharger,1983- 1991 raider.
  • ford:1997- 2014 f-one hundred fifty(all cab sizes),1999- 2016 f-250/ 350/ 450/ 550(all cab sizes),1997-1999 f-250(all cab sizes),2000- 2005 excursion(the front doors only),1997- 2017 day trip,1991-2001 explorer,1975-2002 complete size e-series van.
  • gmc:1999-2018 sierra 1500/ 2500/ 3500(all cab sizes),1988-1999 complete size c/ok truck 1500/ 2500/ 3500(all cab sizes),1973- 2000 suburban,2000- 2018 yukon xl,1992- 2018 yukon,1973- 1987 full size pickups(all cab sizes),1976- 1993 sonoma(all cab sizes),1976- 1996 jimmy,1967- 1996 full length vehicles.
  • isuzu:1984- 2002 trooper,1991- 2002 amigo,1989-1993 choose-up,1991-2002 rodeo. Jeep:1993- 1998 grand cherokee. Mazda:1991 -1994 navajo,1983- 1993 b series percent-up. Mitsubishi:1978-1994 pick out-up,1983- 1989 montero. Nissan:1998- 2003 fronteir(all cab sizes),1999- 2004 x-terra,1986- 2001 pathfinder,1972- 1986 pick out-up,1986-1997 hardbody(all cab sizes). Toyota:1984-1995 4 runner,1974- 1995 choose-up,1980- 1991 fj60/ fj62 land cruiser,1991- 1998 fj80 land cruiser.
Clear
SKU: C111AQJ24F365 Category:

from the producer

approximately bully

bully truck accessories gives a wide variety of accessories to enhance and upgrade both the look and feature of your pickup truck. Bully’s utility-minded truck accessories include a diffusion of hitch steps, truck racks, light bars, nerf bars, and tailgate locks. Those elements are made with fine substances to make certain you get years of use out of them. Bully additionally offers many accessories which might be geared toward customization and fashion. Gasoline doors, door take care of covers, pedals, bumper fillers and pillar post trim may additionally appear like small additions, but collectively they make a large effect on the arrival of your truck. Whether or not you want to enhance get entry to to your cab or truck mattress, shield your cargo, or just deliver your truck a facelift, there is a bully truck accessory to cater on your desires.

we recognize you’ve got loads of alternatives in the goods you pick out for your automobile, and we virtually admire your choice to buy our products. Whilst you purchase a bully truck accessories product you have a business enterprise and a crew that stands at the back of those products in each manner. Our purpose is not to satisfy your expectancies but to constantly exceed them. From our factories to our provider department to our financial, sales, logistics, and advertising and marketing teams, our dedication is to deliver a remarkable product to you at a first-rate fee, each time!

product description

bully black bull aluminum facet step ensures safe and convenient access and exit into a truck or suv. It is a sensible and budget pleasant improve for vehicles. For maximum truck and suv proprietors, adding a side step is frequently their first amendment for his or her truck and/or suv. The aspect step is made from single-piece aluminum forged which is corrosion resistant, therefore prolonging the lifestyles span and sturdiness of the facet steps. The body is lightweight but durable and does not upload useless load to the automobile. It has matte end that creates a regularly occurring appeal and affords a non-slip stepping floor. Textured and additional deep, this step may be connected to a extensive variety of sports activities vans and suvs by means of chevrolet, stay away from ram, ford, gmc and toyota.

size_name

SET OF 2, SET OF 4

style_name

1-PAIR, 2-PAIRS

8 reviews for Bully time-honored truck covered facet step set

  1. CoreyZ

    Had to buy these as a replacement part for a broken set on a vehicle. Vehicle was accidentally lifted incorrectly, causing a weak spot allowing for the previous step to break. These steps are extremely sturdy and easy to mount. Installation only took a few minutes, however there were already steps installed so no guess work was involved. The face of the step is heavily textured, allowing for a very positive friction surface that won’t slip when wet or snowy. This is for a set, two will be included with purchase. If you are looking for an easy, non flashy step that doesn’t take up too much space then this is it. Read more

  2. Jos

    I bought these steps for a 2017 Ram 1500 which these steps are supposed to work with according to the item page and seller information. However, this is a lie. They do not work with a 2017 Ram 1500 and according to other reviews, they don’t fit many of the trucks that the seller claims they fit. When attempting to install them, it quickly became obvious that I would have to drill 2 separate holes in the frame of my truck and 2 more holes at the very bottom lip of the exterior where the exterior shell of the cab is crimped to the frame. This is simply unacceptable. Then I noticed that the diagrams in the book for my frame style didn’t match the steps that I was supposed to attach to my truck. The diagram showed drill holes in the steps that weren’t present in the physical product in my hand. Furthermore, the angled C bracket didn’t look like the diagram and was impossible to fit on the frame in the manner depicted in the manual. Finally, the steps felt incredibly cheap as the aluminum was somewhat thin and poorly machined compared to other types. All in all, the sell page is a complete lie. Read more

  3. Rick

    Third time I have bought this brand of side step. Of course the learning curve has kicked in. Took me about 30 minutes to install. Follow the directions on placement. It works out very well. (Middle of the step lines up with the front edge of the seat frame). Comes with kit for different model trucks but for the Dodge trucks its very easy. Don’t need any of the adapters. I trust this brand because they have never failed. Read more

  4. Scott Speckels

    I can say, had these for about three months, so far so good. The set came with what appeared to be many variations of mounting hardware for different vehicles. Well made. Easy install on the F-150, some other vehicles look to take a bit more work to dial it in, but not much. What I like about these is they are somewhat low profile, they stick out just enough, so you don’t loose much in terms of ground clearance. Some of the others are just a bit too big in my opinion, at least for a 4X4. I suggest since drilling into the undercarriage, coat the holes with some RTV silicone before mounting to protect from rust. I will be purchasing another one for the extended cab kicker door. Read more

  5. Fran

    I installed on a 2012 F150 regular cab. As stated in an earlier post, a template would have been nice for the larger holes. I could have easily made one but didn’t. That resulted in drilling the larger holes a little off center. Easily made them work. For the small holes I used 1″self tapping screws, much easier than the ones provided. Don’t forget the safety glasses, laying on your back, lots of metal shavings. Very pleased with the outcome. I chose polished to match the chrome bumpers & tool box, though the black would have been just as nice. Read more

  6. Mark N Olsen

    It was getting hard for my wife and I to get into our Ford F250 that we use to pull our trailer. I bought these and they are one-piece aluminum and very sturdy. I worried about me being able to install them. They came complete will all hardware for different truck. I watched a video on internet and thought I’d try. I got them installed in 3 hours. The hardest thing to do was for me to get up and down. The actual installation was simple. Great looking also!!!! Read more

  7. Northshore McLeod

    I installed this on my 66 Bronco. The aluminum finish is kind of pitted right out of the box. They supply 4 self tapping screws to install these hoops along with a “Dodge truck ONLY” bolt and spacer. I didn’t like the idea of only using the self tapping screws because I was afraid of the screws pulling out of the sheet metal so I cut and modified the Dodge truck spacer and used that also to help ensure that it doesn’t pull out. For the price of $30-40 this is a decent deal but these do not compare quality wise to the Carr brand hoops that I purchased 20 years ago. In fact, even after 20 years of being outside, the Carr hoops look better than these did right out of the box. Read more

  8. kodiak

    2004 Silverado 2500 hd. A few tips : Measure holes that mount to pinch weld (center of one hole to the other) I found them to be 1/8″ off (8 1/4″,instead of 8 1/8″) as stated in directions. Use an accurate scale or vernier calipers to lay out pinch weld holes. The 3/8″ dimension in from pinch weld worked well. After drilling these holes, tighten the two 5/16″-18 bolts and use correct size transfer punch to leave punch marks to use for top holes,when center punching deeper. Drill these 3/16″ sheet metal screw holes and you’re ready to mount steps. I would use silicone caulking on hardware and under step mounts to weather-proof. Also buy grade 5 hardware or stainless steel. The supplied hardware is junk. My steps work very well and are sturdy. You can’t beat the price. Read more

Add a review

Your email address will not be published. Required fields are marked *

Shopping Cart